Monitor for Wood Moisture and Humidity
1. Lignomat’s wireless monitor for wood moisture and humidity have been in use for many years. Moisture and humidity are reliably and accurately recorded. The system adapts easily to different applications from recording the history in lumber dry kilns to monitoring historic buildings.
2. The on-site datalogger BL2 Memo-Chip records relative humidity. The combination BL2 with MC Tracker records relative humidity and moisture content in wood and other materials.
3. Option with handheld moisture meters extension cables and probes, pins or screws. Measurements are obtained when the cable is directly connected to the moisture meters mini-Lignos DX/C, S/DC or MD/C, Lignometer K and Ligno-VersaTec. The Ligno-VersaTec can be used as monitor for wood moisture and humidity.
For all options, you can choose from a wide selection of probes, pins, screws for various materials between 1/4″ to 7″ deep.
-
DETAILS
Wireless Data Logger
with remote login
Multi materials, widest range.
Review directly at your PC:- Moisture Content
- EMC, Wet/Dry Bulb
- Temperature internal/surface
RH/T/DPT/GPP
-
DETAILS
Data Logger MC/RH
MCTracker with BL2
for moisture and humidity 32000 data sets, alarm.
Multi materials, widest range:- 3 x moisture content
- 1 x RH, Temp, DPT, GPP, EMC
-
DETAILS
Data Logger RH
Memo-Chip BL2 for
relative humidity, temperature,
with precision RH Probe,
32000 readings, with alarm:- 1 x RH, Temp, DPT, GPP, EMC
-
DETAILS
Pkgs for In-Kiln and Wood Monitors
Measure moisture in stacked lumber, monitor drying, in-kiln
- Probes up to 2 3/4″ deep
- Cables up to 50 ft long
- Pin electrode (optional)
-
DETAILS
Pkgs for Monitors with Cables, Pins
Building, water damage repair, restoration, long-term monitors
- Teflon coated pins EL, to 7″
- Pins EG, ¾″
- SS Screws
- Pin electrode (optional)
-
DETAILS
Lumber Dry Kiln Controls and Monitors
for small and large kilns
— predryers
— single and multi zone
— steam and dehumidification
— heat treatment
— steam chambers